Cue smartCUE Interfaces Manual de usuario descargar pdf (Pagina 11)

smartCUE Interfaces | User Manual | Setup the Unit

Setup the Unit

Wired Models

To get access to the factory default configured unit provide following steps

1. Set manually PC Local Area Connection (Ethernet network adapter) to

▪ IP address: 192.168.1.x where x = 1 to 253

▪ Subnet mask: 255.255.255.0

2. Connect the interface to PC. Use crossover cable for direct connection between PC and smartCUE if

your PC ethernet adapter doesn’t support auto-sense.

3. Use standard Internet browser and ll address line with http://192.168.1.254.

4. Provide setup using Admin Web. Use section Conguration / Network to set smartCUE connection to

target network. Settings depends on the network, however typically it is necessary to set

▪ IP address

Wireless Models

The unit uses Ad-Hoc wireless mode for initial setup. To get access to the factory default configured unit

provide following steps

1. Set manually your PC wireless adapter to

▪ IP address: 192.168.1.x where x = 1 to 253

▪ Subnet mask: 255.255.255.0

2. Disable all other PC network adapters which are congured as IP address 192.168.1.x (DHCP or static).

3. Switch on the smartCUE.

4. Connect your PC to wireless network Name: smartCUE

5. Use standard Internet browser and ll address line with http://192.168.1.254.

6. Provide setup using Admin Web. Use section Conguration / Network and Conguration / WiFi to

set smartCUE connection to target network. Settings depends on the network, however typically it is

necessary to set

▪ IP address

▪ Network name (SSID)

▪ Network type: Infrastructure (important step)

▪ Security type

▪ Security key

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Sin comentarios

Cue smartCUE Interfaces Manual de usuario Pagina 11